If you’ve been putting off clipping your dog’s nails because you know it ends up hurting him then you definitely need to try to Dremel dog nails instead.
Your dog is in discomfort when you put the trimming off as their long nails put pressure on their paws. You may think you’re doing him a favor by not putting him through the pain of cutting the quick, but really it just makes it more uncomfortable.
I know how anxiety inducing it is to do nail trimming which is why I heartily recommend grinding instead of cutting.
It’s easier on you and on your beloved pet!
Read on and I will go over some of the common mistakes people make when using a Dremel dog nail grinder from Amazon.com.
How often should you cut your dog’s nails?
There is no one set answer as to how long between nail trimming before you need to trim your dog’s nails.
It really depends on a few factors, but generally, every 1 to 2 months is a good guideline to keep in mind.
You don’t want your dog to have long nails as it can cause some problems with their joints and bones as the nail pushes up into their paw creating pressure.
It isn’t easy to know when they need to be cut though as there are different factors involved with their growth.
What does your dog’s nail growth depend on?
- Breed of dog – Not only do certain breeds have nails that grow faster or slower than others, but some breeds are outside or inside dogs. The growth speed doesn’t factor in so much as how the nails should be kept according to their lifestyle. For instance, small dogs that spend a lot of time inside need to have their nails cut more often.
- Type of dog – This is related to the breed in a way. If your dog spends a lot of time outside, then you don’t need to cut their nails as often since they wear down somewhat on their own. Dogs that spend a lot of time inside won’t have their nails worn down as much. This does also depend on the environment where they walk as grass won’t wear their nails down.
- Age of dog – How old your dog is also plays a part in the frequency of trimming their nails. An older dog is not as active and won’t have their nails getting work down during a walk, for example.
There is one sure sign that your dog needs his nails cut. If when they walk across the floor and you hear them clicking against the hard surface. This means it’s time to break out the Dremel dog nail grinder!
Problems with cutting a dog’s nails
There are few dog grooming experiences that are as dreaded as trimming nails. There are a few things that seem to happen all too frequently to make it a chore that both owner and pup really would love to avoid altogether.
Here are a couple of the problems you may face when you do finally get to trim their nails:
- Anxiety – Your pup definitely has not forgotten that one time you cut way too short and caused them pain. So, now when they see your guillotine nail trimmers, they run and hide. This is natural, but it is also not good for their psyche. Obviously, this can put a strain on the relationship between you and your best friend.
- Bleeding – There is a blood vessel called a quick inside the nail that is very difficult to determine the location.If you go too deep, you will cut this vessel, which is very painful and can bleed quite a bit.
- Infection – If you do end up cutting the quick and it starts to bleed, then it could lead to an infection. Luckily, a dog’s saliva is a natural disinfectant and they likely will be licking it, but you should try to make sure to stop the bleeding quickly with some styptic powder. This will also disinfect the nail and prevent an infection from starting.
What is a Dremel dog nail grinder?
A Dremel for dog nail file is a rotary tool that was used for grinding, cutting and drilling that got repurposed to grind your pet’s nails down painlessly and safely.
But, really it is more than that. It is a tool that is going to add quality of life to you and your pet.
Since it is a dog nail file that grinds the nail rather than cut it, you have way more control over how much nail you remove with less of a chance of injuring your pet.
Because of the safety and pain free experience, your pet will feel much more secure and trusting when you are ready to trim his nails.
This means less anxiety and a much more relaxed pet and owner.
I don’t think it is hyperbole to say that this way of grooming pet’s claws has changed people’s lives for the better.
Pros and cons of using a Dremel dog nail file
Using a Dremel dog nail file to trim your dog’s nails might be the best way to go, but it is not a perfect solution. That’s because there is no perfect solution.
But, let’s go over the advantages and disadvantages so you can get a better understanding about this tool. If this is your first time hearing about using a Dremel dog nail grinder then this should be helpful for you to determine if it is the best way forward for you.
- Control – Since you are grinding and not cutting, you can decide how quickly or slowly you want to go to be way more precise about how much of the nail you take off. When your dog is squirming, you will really appreciate that control.
- No sharp nails – When you use a scissor or guillotine style nail clipper it leaves sharp edges. Then you end up needing to use a file to get those sharp edges off so you don’t get scratched by the nails. This is another step that ends up trying your pet’s patience.
- Works great on thick nails – When you are dealing with a big dog with thick nails, the pressure that it takes to cut the nails with a regular cutter can be hard to manage. This is especially true of elderly pet owners. Grinding a little bit off at a time means it really doesn’t matter how thick the nail is.
- It won’t go dull – Other types of nail cutters eventually will get dull. Then it is either a pain to have them sharpened or expensive to have to replace them regularly. Since you are using Dremel dog nails grinder bits that can be replaced and cost hardly any money, you will never have to wonder what to do when they get dull.
- Doesn’t split nails – Cutting a thick nail can often lead to splits which is very painful for a dog. It takes a whole for a split nail to heal which leaves your pup in agony anytime they are on their feet. Dremel dog nails grinding won’t leave the nails split.
- Takes longer – Since you are working on the nail a little at a time and not just making a quick cut it does take longer for the whole process to finish. If your dog is not patient for more than a few minutes, this might be hard for some. Of course since the dog will no longer associate nail grooming with pain, they are likely to not get as fidgety when you use the dog nail file.
- The bit can heat up – Anytime you grind, you are using friction which can then make things hot. Especially the spinning bit that grinds the nail. This heat gets transferred to the nail which can then get uncomfortable.
- Needs electricity – One nice thing about using a trimmer or guillotine to cut your dog’s nails is that it can be done anytime and anywhere. Needing to charge a Dremel or even use it with a cord may limit when and where you are able to file your dog’s nails down.
After reading the pros and cons you need to weigh the good and the bad aspects to understand if you would rather use the Dremel or a traditional clipper. In my mind, the cons do not outweigh the pros so it seems logical to not go the traditional route. Your opinion may be different after reading the list.
How to use a Dremel dog nail file
Before you start grinding away, you need to get yourself prepared. Setting yourself up for the deed goes a long way towards succeeding. If you do the prep work then your job will be all the easier.
I notice when I want to try something a bit different with a pet, that it pays to expose them to the thing in small increments. In the case of trying to Dremel dog nails, you should start introducing the tool without actually using it.
Start out by having the tool in their vicinity. Lay it next to them without it being turned on so they can get a look at it. Smell it. Become used to its presence.
Then another time, start turning it on when they are nearby. Let them get used to the sound it makes.
Then when it comes time to use it on their nails, it should already know that it is not going to hurt them.
This step should pretty much go without saying. Anybody who has ever had a dog knows that you need a good supply of treats to get them to comply with things they would rather not do.
This is no exception.
The first time you use the Dremel dog nails file, you may want to do just one claw. Literally only one and then give up a treat. If your dog is extra anxious or fidgety you may only be able to get that one done anyway.
But, if you want to ensure that this becomes a regular drama free event, then it pays to go one step at a time.
Another reason to take it easy in the beginning is that the jig will heat up the longer you take to grind the nail down. Since you are inexperienced in the beginning this will likely happen and lead to some discomfort to your dog if you decide to forge ahead anyway.
That would be a very bad move and will likely set you back again when it comes to stress free nail grooming.
If you feel the bit heating up then stop and come back to the grooming another time. Like the next day, for instance.
Only Take Off a Small Amount
Related to the last point, just take off enough to make your dog comfortable. The first few times you do this, you don’t need to get right down to the quick. And you can cause pain by hitting the quick with a Dremel dog nail grinder too. Not as much as with a clipper, but still enough to make your dog feel it.
Do As You Would With a Clipper
There is no real difference to grinding than clipping in the sense that you want to have a firm hold of your dog while you grind.
Try to spread out his toes to get a clear view of the nail and then just go back and forth across the nail. It’s pretty easy, but I included a video below to help you get a visual.
Dremel Dog Nail Grinder Review
There are a few different brands out there for use as a dog nail file that all get called a Dremel. Kind of like how all cotton swabs get called Q Tips.
I like the actual Dremel brand version as I feel like it is the most reliable and solid of the dog nail grinders.
Here are some of the reasons I think it is the best:
With a slow speed of 6,500 RPM and a high of 13,000 you can work as slow or as fast as you like.
Having two speeds gives you more control over a tool which already offers up a lot of precision when it comes to cutting your pet’s nails.
Even on the low speed it is fast enough that it won’t slow you down considerably. Some of the other nail Dremel dog nails grinders out there are so slow that it seems like you’d go faster filing it by hand and Emory board.
Not needing to be plugged in means you have free reign to do your nail grooming wherever you want to. You can even do this outside to avoid needing to clean up any mess from the dust caused by the Dremel dog nails grinder.
It takes 3 hours to fully charge a battery. How much runtime you get depends on the speed you’re using. With a low speed you can probably get around 30 minutes of grinding and about 15 minutes on just the high setting.
The battery is the kind that you plug into an outlet to charge.
You will be very surprised by the power you get from this Dremel dog nails grinder. It can blast through even the thickest nails in no time, and even on the lowest speed setting.
It first came to life as an industrial tool that ended up also becoming a pet grooming tool. So it shows in the power and performance. There is quite a bit of torque so the Dremel dog nails grinder doesn’t slow down even when faced with some very thick nails.
The high power can cause it to heat up though if you are using the high speed setting against very thick nails for too long a period though.
Considering the power it is all the more surprising that the operation runs very quietly. This is great news for those with dogs that get spooked when they heard a loud buzzing sound.
The Dremel dog nails groomer has more of a purr that only gets slightly louder when doing the actual grinding.
The Dremel dog nail file tool comes with 5 sanding bands. They feature a 60 grit sandpaper that can grind away thick nails multiple times before needing to be replaced. If you groom your dog’s nails once per month then you can probably expect to get a full year before needing to replace the bands.
For not much money you get a great tool that can save you money from going to the dog groomer. Add a dog trimmer into the mix and your dog groomer may think you moved away or get rid of your dog!
Honestly, even if it cost more, it would still be worth it to be able to painlessly trim your dog’s nails. If your anxiety would match that of your dog, then the peace of mind you get knowing you are making your dog less stressed is priceless.
If you decide to buy the Dremel dog nails grinder, you will wonder how you managed without it for so long. It is one of those tools that you would never replace with a regular dog nail file or clipper if you didn’t have to. Dog groomers also swear by the Dremel dog nails grinder, so if you can have what the pros have for your own home for a low price, then that itself is a great endorsement.
Do you have any questions about how to use the dog nail file? Have another brand and were thinking of upgrading but aren’t sure? Let me know by adding a comment in the box below. I’ll get back to you as soon as I can!